Skip to content

Free quote on new windows, fitted and finished with care: (949) 816-0562

(949) 816-0562
Installer in gloves lifting an old sliding glass door panel out of its frame on a stucco house wall, with a ladder against the wall and a backyard visible through the opening

ServicesSliding Door Replacement

Sliding Door Replacement in Newport Beach

A sliding door should open with two fingers and close without a draft. We replace worn sliding glass doors with new units that glide, seal and lock properly. The same small crew measures, installs and finishes the job, so nothing gets lost between visits.

When a new sliding door is the right call

Most sliding doors don't fail all at once. The rollers flatten, the track wears a groove, the weatherstripping shrinks, and one day you notice you are lifting the panel to get it moving. On older aluminum doors, the frame itself can bend or pit, and no amount of cleaning brings the glide back.

Replacement makes sense when the problems sit in the frame, the glass or the track rather than in a single part. A new door brings dual-pane low-E glass, a reinforced lock, a fresh sill and a panel that rides on sealed rollers. Near the coast, salt air wears hardware faster, so we look closely at frame material and finish before suggesting a unit.

We keep our crews small on purpose. The person who measures your opening is on site the day the old door comes out, and stays until the new one is adjusted and the trim is done.

What our sliding door replacement includes

Measuring the opening ourselves
We take the rough opening dimensions, confirm the corners are true and the floor is flat, and inspect the sill and the subfloor beneath it before placing an order. A correctly sized door is the first step toward one that seals.
Removal of the old unit
We take out the panels, screen and frame, and haul everything away. Floors and nearby furniture are covered before any cutting starts.
Retrofit or full-frame installation
Depending on the condition of your opening, we fit a retrofit frame inside the existing one or strip it back to the framing. We explain which one suits your home and why.
Flashing, sealing and insulation
The sill is flashed and sealed so rainwater drains outward instead of under the floor. Gaps around the frame are insulated before the trim goes on.
Adjustment and hardware
We set the rollers, line up the lock with its keeper, and fit the screen so the panel travels evenly along the whole track.
Finish work and cleanup
Interior trim and exterior caulking are finished to match, and we vacuum and wipe down the area before we leave.

Signs it's time for a new sliding door

  • Grinding, sticking or slipping off the rollers

    A panel that scrapes, catches halfway across or jumps off its rollers usually points to a track or frame worn past the point of a simple fix.

  • Fog between the panes

    A gray haze trapped between the two layers of glass tells you the edge seal has broken down. Once that happens the door no longer insulates the way it should, and no amount of cleaning will clear it.

  • Drafts and whistling

    Shrunken weatherstripping and a warped frame let air and dust slip through. You often notice it down by the floor first.

  • Water at the sill

    Puddles or stained flooring after rain point to a failing sill or missing flashing, which can harm the subfloor if left alone.

  • A lock that won't catch

    When the panel no longer meets its keeper squarely, the door can't be fully secured.

  • Single-pane or dated glass

    Older doors with a single layer of glass let heat pour in on summer afternoons and give up warmth on cool evenings.

How the job runs

  1. 1

    Free in-home estimate

    We visit, look at the opening and talk through frame materials, glass options and configuration. You get a written quote with no sales pressure or obligation.

  2. 2

    Ordering your door

    Once you approve the quote, we order the unit to the measurements we took ourselves. We'll let you know when it arrives and schedule the install.

  3. 3

    Installation day

    The same crew arrives, protects the floors, removes the old door and sets the new frame. Most single-door jobs are finished in one day, though a full-frame replacement or sill repair can add time.

  4. 4

    Final walkthrough

    We open and close the door with you, show you the lock and screen, and point out how to keep the track clean. Then we clear out and take the old door with us.

Estimator in a cap holds a fan of white, tan, brown and black frame color samples for a homeowner at a stucco home's black front door, with a ladder and tools nearby

What shapes the price of a new sliding door

No two openings are quite alike, so we quote each door once we have looked at it in person. The written quote breaks out the door, the glass, the labor and any extra work the opening needs. That way you can see exactly where the money goes before anything is ordered.

Width and number of panels
A typical two-panel slider runs less than a wide three- or four-panel unit. Wider doors need a heavier frame and more glass.
Frame material
Vinyl, fiberglass and aluminum are priced differently, and each one weathers in its own way in salty coastal air.
Glass choices
Doors come with tempered safety glass as standard. Low-E coatings, gas fills and laminated glass raise the cost and the performance.
What we find in the opening
A rotted subfloor, a cracked sill or an opening that is out of square has to be corrected first, or the new door will not seal.
Retrofit or full-frame
Setting a new frame inside the existing one is usually the simpler job. Taking the old frame out completely can disturb stucco or siding and adds work.

Sliding door replacement questions

Something not covered here? (949) 816-0562

Do you have to tear out stucco to replace my sliding door?

Not always. When the existing frame is solid, a retrofit installation sets the new frame inside it and the stucco stays untouched. If the frame is damaged or the opening is out of square, full-frame replacement may be the better route, and we'll walk you through that during the estimate.

How long will my home be open to the outside?

We don't pull the old door until the replacement has been delivered and checked. On most single-door jobs the opening is closed up again that same day, and we stay until the new panel locks.

Can I change the size or layout of the door?

Often, yes. Switching which side slides, or going from two panels to three, is a common request when the opening allows it. Making the opening wider means reworking the framing, so we'll talk through what makes sense for your home.

Should I choose a sliding door or a multi-folding door?

A sliding door keeps one panel fixed and needs no floor space to open. A multi-folding door stacks its panels to one side and opens most of the wall. If the wider opening appeals to you, our Multi-Folding Doors page explains how those go in.

Will the same people be at my home the whole time?

Yes. We are a small team, and the crew that measures your door is the crew that installs and adjusts it. You won't need to explain your project to someone new partway through.

Two-story stucco house with tile roof and new black-framed windows with stickers on the glass, sawhorses, tool bins and drop cloth on the driveway

Ready for a door that slides easily again

Tell us about your current door and we'll arrange a time to see it. You'll get a written quote and an honest view of retrofit versus full-frame for your opening.